Request a Quote

Weld process development

When a part or material combination has no established weld procedure, we weld a sample and evaluate it before production.

Weld Process Development

Sample welds for new and challenging materials

Some jobs arrive without a proven procedure: a new alloy, a dissimilar-metal joint, or a new part that hasn't been qualified yet. For these, we begin with a sample weld, then cross-section, polish, and etch it, so the weld can be evaluated before any production parts are welded.

The evaluation checks weld penetration, profile, integrity, fusion, and overall weld quality, and it sets the welding parameters before production starts. EB welding is particularly well suited to joining many combinations of dissimilar metals when the materials are compatible. See the materials we weld.

Engineering Support

Help before and after the weld

  • Part and joint design

    Input on the part and joint design for electron beam welding.

  • Tooling and fixturing

    Fixtures and tooling that hold the joint in position for the beam.

  • Metallurgy

    Input on the materials and metal combinations being joined.

  • Heat treating

    Can be carried out under our supervision when your part needs it.

  • Non-destructive testing

    Additional NDT can be carried out under our supervision; helium leak testing is done in-house.

  • Recorded parameters

    Approved weld parameters are recorded as a WPS and kept in our database file.

Development Process

How a sample weld is evaluated

  1. Sample welding

    A test piece is welded using the joint, depth, and material from your print.

  2. Cross-sectioning

    The test piece is cut across the weld to expose the fusion zone.

  3. Polishing

    The cut face is polished smooth so the weld can be read clearly.

  4. Etching

    Acid etching brings out the weld depth and the edge of the fusion zone.

  5. Weld evaluation

    We check penetration, profile, integrity, and fusion, then send the sectioned sample to you to measure and approve.

FAQ

Weld process development questions

When is a sample weld needed?

New parts and new materials start with a sample weld. Once a part, weld, and parameter set are approved, repeat orders are welded with the recorded parameters and don't need a new sample.

Do I get the sample?

Yes. The sectioned sample goes to you, so you can measure the weld depth and run your own checks before approving it.

What happens after I approve the sample?

We record the parameters as a WPS (Welding Procedure Specification) for that part. Production parts are welded with those recorded parameters, and a quality tracking form ships with every order.

Can you arrange heat treating or NDT?

Yes. Heat treating and non-destructive testing can be carried out under our supervision, and helium leak testing is done in-house.

Request a Quote

Send us your print

Quotes are typically returned within 1 day. Include the material, quantity, and the date you need the parts.

PDF · DWG · DXF · STEP · JPG · PNG