Electron beam welding for oil and gas downhole tools
Our Houston shop makes circumferential EB welds on downhole tool housings, sensors, probes, and gauges for high-pressure, high-temperature service.
Why downhole parts are electron beam welded

Downhole tools and the sensors that run with them work in high-pressure, high-temperature environments. Weld depth is set by the part's diameter and application, and on a hollow part the weld has to stop short of the inner bore. Electron beam welding puts a deep, narrow weld where the drawing calls for it, with low heat input and no filler metal.
- Penetration from 0.010" to 6", depending on machine
- CNC-controlled, repeatable weld parameters
- Low heat input near plastics and electronic components
- Vacuum weld zone, free of oxides and nitrides
- 0.010"–6"Weld penetration, depending on machine
- 23.5 ftMax part length, depending on joint location
- 1 dayTypical quote turnaround
- 2–3 daysExpedite in business days, quantity permitting
Downhole parts we weld
- Housings
Instrumentation tool housings
Circumferential welds on downhole instrumentation tool housings, small to large. Long housings fit our 42 kW CNC Sciaky, one of the most powerful CNC electron beam welding machines in Texas.
- Instruments
Probes and gauges
Probes and gauges built for the same high-pressure, high-temperature conditions as the tools they run with.
- Sensors
Sensor housings and assemblies
Housings and assemblies for temperature, radiation-detection, and other downhole sensors, welded in production quantities.
- Plugs
Small-diameter plugs
Small-diameter plugs welded to the depth and tolerance called out on the drawing.
- Screens
Filter screens
Spot-welded filter screens, including screens that filter hydraulic fluid in downhole tools. Filter screen spot welding.

Vendor approval and turnaround
We're on the approved EB welding vendor lists of major oilfield service companies. Every new part still starts with a test piece you verify before production, and every shipment includes a quality tracking form.
Welding is all we do, so your parts don't wait behind a production schedule of ours. Quotes typically come back in 1 day, standard production takes about 1–2 weeks, and expedite runs 2–3 business days, quantity permitting.
How we qualify a new partSend us your print
Quotes are typically returned within 1 day. Include the material, quantity, and the date you need the parts.
PDF · DWG · DXF · STEP · JPG · PNG
- Phone (713) 690-2326
- Email info@beamweld.com



